Enhanced Digital Technology DVR2000E Voltage Regulator
DVR2000E True RMS Sensing – One or Three Phase
Connect sensing mode you prefer. The DVR2000E Senses 95 to 600 volts ±10% at 50/60 hertz. Patented circuitry senses true RMS voltage rather than average for superior load regulation.
DVR2000E Soft-Start Ramp on Initial Start-Up
Controlled increase to rated voltage. Limits overshoot of voltage during voltage build-up.
DVR2000E Engine Unloading
Monitors rate of frequency change during transient conditions. Provides additional voltage dip during speed drop to allow engine to recover faster.
DVE2000E Overvoltage Shutdown
Provides generator protection during sustained overvoltage. The overvoltage point is preset at 20% over normal generator operating voltage, with a preset timeout of 0.75 seconds.
DVR2000E VAR/PF Controller
Model DVR®2000EC (optional) provides control when paralleled to utility power. VAR or PF control can be selected or changed by regulator adjustment.
DVR2000E Encapsulated Design
Maximum protection against moisture or abrasive contamination, which can lead to early regulator failure. Tested to MIL-STD-705, Method 711.1C. Salt fog tested to MIL-STD-810E.
DVR2000E Auto/Manual Mode
Exciter field current controlled by the regulator or manually set at a fixed value.
DVR2000E DVR2000E DVR2000E DVR2000E DVR200E DVR2000E DVR2000E DVR200E